# Ten decisions to make before exhibition stand design starts URL: https://www.zarakevents.com/blog/decisions-before-exhibition-stand-design/ By Logeswari KM, 28 September 2026. Topic: Exhibition Stands. Summary: Exhibition stand design goes wrong in a predictable way: a concept is drawn before anyone agrees what the stand is for. Make these ten decisions first. Exhibition stand design goes wrong in a predictable way. A design is commissioned and looks good, until it meets the organiser's regulations, the actual footprint and the fact that nobody agreed what the stand is for. Every revision after that costs time you do not have before a show. Make these decisions first, and the design process becomes much shorter. ### Key takeaways - Decide what the stand is for first. Lead capture, product demonstration, meetings and presence each lead to a different stand. - Read the organiser's regulations before the concept: height limits, hanging banners, raised platforms and building to the boundary. - Plan storage, power and connectivity early. Organisers sell power in fixed increments by a deadline, and late orders cost more. - Check your artwork. Large-format graphics expose weak files, so confirm what print-ready assets exist and who owns them. - Work the deadline chain backwards from the show, because every link from design approval to dismantling has its own lead time. ### 1. What the stand is for A stand can be for lead capture, product demonstration, meetings or simple presence, and each purpose gives a different stand. A lead-capture stand needs open edges and a short path to a conversation. A meeting stand needs enclosed, quieter space. A demonstration stand is built around the thing being demonstrated and the crowd that gathers to watch it. Choose the primary purpose, because a stand that tries to do all four does none of them well. ### 2. What are the common exhibition stand types? There are four common exhibition stand types: a row stand has one open side, a corner stand has two, a peninsula has three and an island has four. Each type has its own design logic, since storage and services get pushed to the closed edges and branding has to read from whichever direction people approach. Get the stand number, the dimensions and the type from the organiser before anyone draws anything. ### 3. The organiser's rules Organisers set regulations on height limits, hanging banners, whether a raised platform is permitted, and building to the boundary, meaning right up to the edge of your space. They also set requirements for structural drawings and approval deadlines. These rules are not suggestions, and they change from show to show. The organiser manual answers most of these questions, so read it before you write the design brief, not after the first concept. ### 4. What actually happens on the stand Think about how many staff will be on the stand at once, whether people will sit or stand, and whether you will serve food or drinks. Will there be a screen, a product, a demonstration or a prize draw? Count the bodies and the furniture, and you will know whether the space works long before it is rendered as a 3D image. ### 5. Storage Every stand has coats, bags, literature, samples, empty boxes, and the kettle nobody admits to, so every stand needs a cupboard. Most designs add it late, which means taking space from an area that was already allocated. Decide the storage volume early and design around it. ### 6. Power and connectivity Screens, lighting, demonstration equipment and device charging all need power. Organisers usually sell power in fixed increments that you must order by a deadline, and late orders cost more. If you need reliable internet for a live demonstration, treat the hall wifi as a fallback, not the plan. ### 7. Graphics: what exists, and at what resolution Large-format graphics, meaning big printed panels and banners, expose weak artwork: a logo that looks fine on a slide can be unusable at two metres. Establish early what print-ready assets exist, who owns them and who will adapt them for the stand. Then set an artwork deadline well before the print deadline. ### 8. Reuse, or one-off If you exhibit several times a year, a modular stand may suit you. This is a reusable system that adapts to different footprints, and over a season it usually costs less than a bespoke build each time. The trade-off is that a modular system constrains the design and must be stored between shows. For a flagship one-off, a bespoke build is easier to justify. Decide which one you are doing before you fall in love with a concept that works only once. ### 9. Who staffs it, and what they are told Even the best stand in the hall underperforms if the people on it are unbriefed. Decide who will work on the stand, in which shifts, what they will ask visitors and where each lead goes afterwards. This is also a design input, because it determines how many seats and stations you need, and whether you need a private place for a quiet conversation. ### 10. The deadline chain, backwards Start from the show and work backwards through the chain: dismantling, show days, build days, delivery, production and fabrication, approved drawings, organiser deadlines, artwork sign-off and design approval. Every link has its own lead time, and the date that matters is rarely the show date. It is the approval date, several weeks earlier, which arrives sooner than anyone expects. ### Decisions first, design second This is not about being conservative. It is about spending the creative effort once, on a concept that can actually be built in the space the organiser sold you and the time you have. Designers do better work with constraints than without them. Our exhibition stand design and build page explains how we take a stand from concept through fabrication and installation, and you can see completed builds and concepts in our work. If the stand also needs a stage, sound or screens, our guide on how to brief an event production company explains what to put in that brief. ### Related guides - How much does an exhibition stand cost in Dubai? - How to choose an exhibition stand contractor in Dubai - Custom, modular or double-decker: choosing an exhibition stand - Exhibition stand design ideas that work in Dubai - Upcoming exhibitions in Dubai 2027 ### Frequently asked questions Q: What do I need before starting exhibition stand design? A: You need your stand number, dimensions and type, along with the organiser regulations. You also need to know the primary purpose of the stand, how many staff will work on it, your storage needs, your power requirements, what print-ready artwork exists, and whether the build is a one-off or reusable. Q: What is the difference between a row, corner, peninsula and island stand? A: The difference is the number of open sides: one, two, three and four. This changes where storage and services can go and which directions your branding must be read from, so it shapes the design from the very start. Q: Is a modular stand cheaper than a custom build? A: If you exhibit several times a year, a modular system that adapts to different footprints usually costs less, although it constrains the design and needs storage between shows. For a flagship one-off, a bespoke build is easier to justify. Q: When is the real deadline for an exhibition stand? A: It is not the show date. Work backwards through build days, delivery, fabrication, approved structural drawings and the organiser's submission deadline, and you will find that the date governing everything is usually several weeks before the show.